Black Oxide Plating

August 14, 2015 – 02:12 pm

Dress Flat Washer, Countersunk, Case Hardened Steel, Black Oxide

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4" bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 12L14 Low Carbon Steel, then case hardened and black oxide plated for strength, appearance, and a slight corrosion inhibitor.

A component washer that has a 82 degree countersunk inner diameter that allows any standard flat head screw to seat flush with the top of the washer, presenting a completely finished and smooth appearance
A machined component perfect for exposed applications that require strength and a smooth and flush dressed appearance
Machined from 12L14 Low Carbon Steel, with a Black Oxide plating
A machined component used on faceplates, handles, and anywhere you need flush mount

Source: partdresses.blogspot.com

Read electro-mechanical engineering blog

Black Oxide Line

Nickel Oxide / Black Nickel Oxide / Green Nickel Oxide ...

Climax Metal 2C-112 Steel Two-Piece Clamping Collar, Black Oxide Plating, 1-1/8" Bore Size, 1-7/8" OD, With 1/4-28 x 3/4 Set Screw
BISS (Climax Metal Products)

Effective on hard and soft shafts
Design fully engages the shaft without any marring
Provides 360 degree of clamping force
Easily installed where major disassembly would otherwise be required
Black oxide provides some corrosion resistance

Climax Part RC-050 Mild Steel, Black Oxide Plating Rigid Coupling, 1/2 inch bore, 1 inch OD, 1 1/2 inch length, 1/4-20 x 1/4 Set Screw
BISS (Climax Metal Products Company)

Provides torque transmision and alignment
Cost effective coupling design
Easily installed where major disassembly would otherwise be required
Tolerance: +.5/+.0025
Black oxide provides some corrosion resistance

	Climax Metal 2C-075-KW Two-Piece Clamping Collar, With Keyway, Black Oxide Plating, Steel, 3/4" Bore, 1-1/2" OD, 1/2" Width BISS (Climax Metal Products) Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars Keyway for use on keyed shafts Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion Includes socket-head cap screws for securing the collar onto the shaft Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F)
	Climax Metal C-106-BO Shaft Collar, One Piece, Set Screw Style, Black Oxide Plating, Steel, 1-1/16" Bore, 1-3/4" OD, 5/8" Width, With 5/16-18 x 5/16 Set Screw, (5-Pack) BISS (Climax Metal Products) Setscrew shaft collar for applications supporting low axial loads and simple positioning Effective on shafts made of softer material than the setscrew material Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion Includes a socket setscrew for securing the collar onto the shaft Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F)
	Climax Metal MC-12 Steel Set Screw Collar, Metric, Black Oxide Plating, 12mm Bore Size, 22mm OD, With M6 x 6 Set Screw BISS (Climax Metal Products) Effective on hard and soft shafts Cost effective collar design Easily installed where major disassembly would otherwise be required Tolerance: +.5/+.0025 Black oxide provides some corrosion resistance